Elonex

1000ET eTouch Android Tablet

1000ET | 10" Capacitive eTouch

View Frequently Asked Questions for eTouch 1000ET.


Google Play Store Issues

We are currently experiencing issues with the Google Play store, while we endeavour to rectify this issue we recommend 1000ET users seek an alternative app store.
Any updates on this issue will be posted here.


Download the Quick Start Guide

Please click this link to download an updated electronic version of the 1000ET Quick Start Guide.


Download the 1000ET User Guide

Please click this link to download an updated electronic version of the 1000ET User Guide.


Important Firmware Updates - Android 2.2

Please Note: This update does not enable Flash. The 1000ET does not support Flash content. Some eTouch units can be upgraded via a microSD card update and some only via USB. To find out if you can upgrade via micro SD Card:

  1. Remove the micro SD Card
    (push inwards and it pops out).
  2. Then press and hold the left hand Volume button while pressing the Power button.
  3. Does the eTouch show "Press 'ENTER/MENU' enter update mode" at the bottom of the screen when it powers up?

YES - You can upgrade via microSD Card
(either via your PC, or using the eTouch directly)


NO - You can upgrade by USB
Please download the instructions from the link to the right or phone technical support on 0871 222 3456.


YES - Android 2.2 Upgrade using the eTouch directly
Before starting please ensure that your eTouch is fully charged or have the mains charger connected.

  1. Download and install Androzip (Free) from the App market
  2. Insert a micro sd card into the eTouch
  3. Using the browser type in elonex.com/support/etouch/1000ET-FWv1122.zip
    The file will automatically download
  4. Open the Androzip application – it should automatically show the contents of the sd card
  5. Tap the download folder
  6. Tap the file 100ET-FWv1122.zip
  7. Tap the Extract to... option
  8. Tap the home icon (top left of screen)
  9. Tap the Extract Here button (top right of screen)
  10. Turn off the eTouch
  11. Hold down the left hand side of the back button and press the power button at the same time
  12. A message saying Found ZT_Bx.spl should appear on the screen
  13. Press the back button on the right hand side of the screen
  14. Press the back button again. The eTouch will be re-programmed and reboot. The rebooting process takes a few minutes
  15. A message will appear saying Complete action using – Tap the option highlighted in orange
  16. Tap Finish setup
  17. A message will appear saying Complete action using – Select the first option com.android.sdksetup.DefaultActivity Congratulations, your eTouch is now successfully upgraded to Android 2.2

YES - Android 2.2 Upgrade Via PC

  1. Download 1000ET Firmware v1122 Files (87Mb)
  2. Right click the downloaded file 1000ET-FWv1122.zip
  3. If you have a micro sd card directly connected to the computer you can select the Extract files option and extract to the location of the micro sd card.
  4. Transfer the micro sd card to the eTouch 1000. Making sure the eTouch is turned off. Before proceeding ensure that your eTouch is fully charged or have the mains charger connected.
  5. Hold down the left hand side of the back button and press the power button at the same time
  6. A message saying Found ZT_Bx.spl should appear on the screen
  7. Press the back button on the right hand side of the screen.
  8. Press the back button again. The eTouch will be re-programmed and reboot. The rebooting process takes a few minutes.
  9. A message will appear saying Complete action using – Tap the option highlighted in orange
  10. Tap Finish setup
  11. A message will appear saying Complete action using – Select the first option com.android.sdksetup.DefaultActivity

Congratulations, your eTouch is now successfully upgraded to Android 2.2


USB Firmware Files

Download 1000ET Firmware Upgrade Procedure v1.03
Download 1000ET Firmware v1.03u Files (79Mb)

PLEASE NOTE. The upgrade requires a Windows XP/Vista/7 computer (32bit only) and a USB Cable. If you do not have access to these please call Elonex.

For technical support please call 0871 222 3456 or email support@elonex.com.

Technical Support
 
English Support
UK Flag
 

For further support please call our Tech Support Help desk on

0871 222 3456 (Mon-Fri- national rate)

or click here to ask an Elonexpert.

1000ET Quick Start Guide

User Guide
 

1000ET User Guide

User Guide